Atlas Copco PHE 3X 수리 지침 - 페이지 8

{카테고리_이름} Atlas Copco PHE 3X에 대한 수리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco PHE 3X 14 페이지.

Before assembly submit all relevant parts to an electrical test (see chapter Electrical and Mechanical

Electrical test

Test Instruction).

Lubrication

At each maintenance the tool must be lubricated as shown in the lubrication chart. After having

dismantled the entire tool remove the used grease completely and replace it by new grease. Please

pay attention to the following lubrication chart:

Illustration: PHE 3 X

Bauteil

The service set contains tubes with grease (Darina, Tivela). All items listed above bust be lubricated

with the stated amount of grease. With the remainder of the Darina-tube evenly lubricate the gear

box and the spindle sleeve.

Bezeichnung

Spindle wheel toothing

Hollow of back gear, spindle sleeve

Toothing of back gear

O-rings

Needle bearing

Porous bearing boring

Spindle sleeve thrust bearing

Plunger outside

Cylinder inside

Spindle sleeve outside

Cylinder outside

Cylinder bolt

Striker

Tumble drive boring

Gear sleeve inside and outside

Ratchet/spindle wheel

Angular wheel

Thrust bearing

Repair Instruction No. 175.8/95

Fettart

Darina

Tivela

Darina

Tivela

Darina

PHE 3, PHE 3X

Menge

14g

je 1g

0,5g

PAGE