Atlas Copco PN 3500 수리 지침 - 페이지 17

{카테고리_이름} Atlas Copco PN 3500에 대한 수리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco PN 3500 18 페이지.

Mounting the

Insert the sleeve (1) (service tool) into the

gear housing

gear housing (2) (the sleeve protects the

rotary shaft seal in the gear housing from

damage during assembly).

Fit the gasket (3) to the motor housing (4).

Fit the gear housing (2) to the motor hous-

ing (4) and screw it down (2,5 Nm)

Fit the switch lever (5) (mount it in the

„drilling" position).

Only applicable

Insert the spring (8) and the retaining

for PN 3500:

disk (7).

Mounting the

Depress the retaining disk (7) and insert

SDS-plus-recep-

the ball (6).

tion

Fit the retaining ring (5) and the sliding

sleeve (4).

Depress the sliding sleeve (4) and insert

the seal ring (3) into the pass.

Fit the spacer (2).

Push down the sliding sleeve and fit the

rubber cap (1).

The pin must grasp the elongated hole

in the locking slide.

Repair Instructions No.179.11/97

PN 3500 / PN 3500 X

1 2 3

6 7 8

PAGE