Atlas Copco Secoroc YT28 운영자 지침 매뉴얼 - 페이지 8

{카테고리_이름} Atlas Copco Secoroc YT28에 대한 운영자 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco Secoroc YT28 20 페이지. Pusher leg rock drill

Fitting the working tool

1. Push the retainer outwards in the direction of the arrow (see picture below),

until the front portion of the retainer is able to accommodate the working tool

collar.

2. Insert the drill in the chuck.

3. When the drill bottoms, push back the retainer to lock it.

1. Push the retainer outwards in the direction of the arrow until the working tool

collar disengages from the front of the retainer.

2. Pull the working tool out.

3. Push back the retainer.

Mount the pusher leg (1), lock sleeve (2), rubber pad (3), washer (4) and locking

nut (5) in the order shown in the picture below.

Turn the locking nut clockwise with a wrench until you hear a "click".