Atlas Copco 8423031700 제품 지침 - 페이지 7

{카테고리_이름} Atlas Copco 8423031700에 대한 제품 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco 8423031700 16 페이지.

페이지 인쇄

G2511-125

Installation

Installation Requirements

Air Quality

■

For optimum performance and maximum product life we recommend the use of compressed air with

a maximum dew point of +10°C (50°F). We also recommend to install an Atlas Copco refrigeration

type air dryer.

■

Use a separate air filter which removes solid particles larger than 30 microns and more than 90% of

liquid water. Install the filter as close as possible to the product and prior to any other air preparation

units to avoid pressure drop.

For impulse/impact tools make sure to use lubricators adjusted for these tools. Regular lubricators will

add too much oil and therefore decrease the tool performance due to too much oil in the motor.

Make sure that the hose and couplings are clean and free from dust before connecting to the tool.

Both lubricated and lubrication free products will benefit from a small quantity of oil supplied from a lu-

bricator.

Air Lubrication Guide

Brand

Atlas Copco

Shell

Compressed Air Connection

WARNING Risk of severe injury

Air under pressure can cause injury.

Always shut off the air supply when not in use or before any adjustments.

►

Drain the hose of air pressure and disconnect the tool from air supply when not in use or before

►

any adjustments.

Always use the correct hose size and air pressure for the tool.

►

WARNING Compressed Air

High air pressure can cause severe damage and bodily injury.

Do not exceed maximum air pressure.

►

Make sure that there are no damaged or loose hoses or fittings.

►

For correct air pressure and hose size, see the Technical Product Data on -

servaid.atlascopco.com

Make sure that the hose and couplings are clean and free from dust before connecting to the tool.

Installation Instructions

Visual inspection - tools and accessories

Inspect the tool and its parts visually before use.

The parts in the list below may vary depending on model.

or www.atlascopco.com.

Air lubrication

Optimizer (1 liter) 9090 0000 04

Chopin 46

Shell Air Tool Oil S2 A 320

https://

Installation