Bose Acoustimass 16 매뉴얼 - 페이지 12

{카테고리_이름} Bose Acoustimass 16에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Acoustimass 16 24 페이지. Home entertainment speaker systems
Bose Acoustimass 16에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지), 빠른 설정 매뉴얼 (1 페이지), 사용자 설명서 (18 페이지)

페이지 인쇄

Setting Up

Checking the connections

Connecting the Acoustimass module to power

Upgrading your Acoustimass 15 Series II speaker system

Check all connections from the receiver to the Acoustimass

the cube speaker arrays (Figure 5 and Figure 6). Make sure all cube speaker arrays are con-

nected to the proper terminals according to their position in your room. Check that all wires

are connected to your surround receiver in phase (+ to + and – to –). Incorrect wiring can

result in a total loss of module output. Correct wiring problems before you plug your receiver

in and turn it on.

Note: Bose

recommends using a quality surge suppressor on all electronics equipment.

Voltage variations and spikes can damage electronic components in any system. A quality

suppressor can eliminate the vast majority of failures attributed to surges and may be pur-

chased at an electronics store.

After you have checked all system connections, plug the power cord of the powered Acousti-

mass module into an AC (mains) receptacle. Your Acoustimass speaker system will turn on

and off automatically as it receives a signal from your surround receiver.

Your Acoustimass 15 Series II speaker system can be upgraded to provide you with 6.1 or

6 channel surround sound.

The 6.1 upgrade kit contains one black (PC 029661) or white (PC 029662) cube speaker array,

a 50-foot connecting cable, and complete connection instructions.

To purchase the 6.1 upgrade kit, contact your local authorized Bose retailer or call Bose

directly. See the list of Bose ofﬁces and phone numbers enclosed with your system. When

ordering, you will need to know the serial number of your Acoustimass module.

AM264924_00 _V.pdf • August 13, 2002

module and from the module to