Bose Acoustimass 5 소유자 매뉴얼 - 페이지 15

{카테고리_이름} Bose Acoustimass 5에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Acoustimass 5 22 페이지. Powered speaker system
Bose Acoustimass 5에 대해서도 마찬가지입니다: 소유자 매뉴얼 (9 페이지), 소유자 매뉴얼 (22 페이지), 소유자 매뉴얼 (16 페이지)

페이지 인쇄

Figure

14 a

Setting Zone 2 Protocol

Setting

Zone

2 Protocol

For the Acoustimass

5 or 20 powered speaker system to work properly with a Lifestyld' media center,

you will need to check the Zone 2 Protocol to ensure that it is set to Normal mode (Figure 14 a).

1. While your Lifestyle system is on, press the Settings button on your remote control. This will open

the on-screen display.

2. Scroll down with the down-arrow button and select System Setup using the Enter button.

3. You will now see a menu entitled System Setup (1 of 3). Scroll down to "more...".

Continue to scroll down through (2 of 3) to (3 of 3). The last item on System Setup (3 of 3) is Zone 2

Protocol.

4. If necessary, use the right-arrow button to set the protocol from Legacy to Normal.

5. If you changed the Zone 2 Protocol, shut off the system and turn it on again; this ensures that the

Zone 2 Protocol is reset to Normal mode.

Connecting

power

to your

system

CAUTION:

If you purchased a dual-voltage system, it is important that you set the speakers to the

correct voltage. To do this, refer to "Selecting the correct voltage" on page 6.

Follow these steps to connect power to your Acoustimass powered speaker system:

1. Plug the power cord from the Acoustimass module into an AC power (mains) outlet.

2. Insert the power cords of the Lifestyle _ system into an AC power (mains) outlet.

3. Turn the Acoustimass module power switch to the On position.

AM26283S

O0 !Zpdf

December 20, 2001