Bose Acoustimass 5 Series 서비스 매뉴얼 - 페이지 3
{카테고리_이름} Bose Acoustimass 5 Series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Acoustimass 5 Series 10 페이지.
- 1. Table of Contents
- 2. Warranty Information
- 3. Specifications
- 4. Product Description
- 5. Disassembly/Assembly Procedures
- 6. Test Procedures
- 7. Series III Test Setup Diagram
- 8. Part List Notes
- 9. Main Part List, Acoustimass 5 Series III (See Figure 2)
- 10. Packing List, Acoustimass 5 Series III Loudspeaker System (See Figure 3)
- 11. Part List, Acoustimass 5 Series III Loudspeaker System Crossover (See Figure 4)
External Dimensions:
Weight:
Sensitivity:
Crossover
Frequency:
System Protection:
Cube Protection:
Impedance:
Power Handling,
all channels:
®
The Bose
Acoustimass
the Series II. It uses two extended response satellite speakers that are 20 percent smaller
than earlier versions. The satellite speaker assemblies reproduce the middle and high
frequencies of two full-range channels. The satellite speaker assemblies use a new style
push connector for ease of installation and better wire retention. The satellite speaker
assemblies are non-repairable.
The Acoustimass bass module contains two woofers capable of reproducing two channels
of low frequency information. The AM-5 Series III system may be used in conventional stereo
applications or as left and right (front or rear) channels in a home theater application.
The bass module is the same size and appearance as the AM-5 Series II.
SPECIFICATIONS
Satellites:
Bass Module:
Single Satellite:
Bass Module:
Packed System:
Satellites:
Bass Module:
PRODUCT DESCRIPTION
®
5 Series III Loudspeaker System offers several improvements over
3.15 x 6.1 x 4.1 in. (8.0 x 15.5 x 10.5 cm)
14 x 7.5 x 17.0 in. (35.6 x 18.4 x 43.2 cm)
2.4 lb. (1.1 kg)
21.0 lb. (9.5 kg)
28 lb. (12.6 kg)
≥ 83 dBspl, 400 Hz octave
≥ 83 dBspl 100 Hz octave band
≤ 200 Hz at 6 dB/oct.
PTC, Lamp, Resistor
None
6 Ohms nominal, 4.8 Ohms minimum from
20 Hz - 20 kHz, all channels
100 Watts continuous per IEC-268-5 for
100 hours. Recommended amplifier/receiver
power 10-200 Watts per channel.
3