Bose Acoustimass 6 Series III 소유자 매뉴얼 - 페이지 15

{카테고리_이름} Bose Acoustimass 6 Series III에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Acoustimass 6 Series III 18 페이지. Home theater speaker sytem
Bose Acoustimass 6 Series III에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (1 페이지), 소유자 매뉴얼 (44 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (25 페이지), 소유자 매뉴얼 (23 페이지)

페이지 인쇄

Troubleshooting

Problem

System does not function

at all

No sound

No sound from cube

speakers

Sound is distorted

No bass

Not enough or too much

bass

No surround sound

Customer service

If you have a problem with your Acoustimass

and try the following solutions. If you still have a problem, contact your Bose

arrange for service. To contact Bose directly, refer to the list of service offices and phone

numbers enclosed in the shipping carton.

What to do

• Make sure the receiver and powered Acoustimass module are plugged into an operating

AC wall outlet and that the receiver is turned on.

• Be sure to select a source at the receiver (video, CD, DVD, tuner).

• Check the speaker connections.

• Make sure that the powered Acoustimass module is plugged in.

• For digital sound, be sure a coaxial or optical cable connects the digital output of the

DVD player with the digital input on your receiver.

• Be sure the audio source selected is correct. For example, select DVD audio on your

receiver and player for DVD sound.

• Disconnect any headphones.

• Increase the volume.

• Be sure the powered Acoustimass module is plugged in and the receiver is turned on.

• Make sure speaker wire is not damaged.

• Reduce the volume of external components connected to the receiver.

• Be sure the speaker connections at the receiver/amplifier are correct (+ to + and – to –).

• Move the powered Acoustimass module closer to a wall or corner to increase bass.

Move it farther away from a wall or corner to decrease bass.

• Adjust the LFE Level or Room Compensation control.

• Be sure your receiver is processing a signal from a Hi-Fi VCR, stereo TV, laserdisc, or

DVD player, or other surround-sound source.

• If you are using the Dolby Pro-Logic mode, check that surround-sound is turned ON.

• If you are using digital programming, verify that the settings are correct at the receiver.

• Be sure the source material (DVD, laser disc, or broadcast programming) is Dolby Digital

encoded.

For additional help in solving problems, contact Bose customer service. See the list of service

offices and phone numbers enclosed in the shipping carton.

speaker system, turn off your sound source

Reference

dealer to