Atlas Copco 8432084425 제품 지침 - 페이지 7

{카테고리_이름} Atlas Copco 8432084425에 대한 제품 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco 8432084425 16 페이지.

QMC21-25-HM4

Installation

For details, please refer to the dimensional drawings.

Attach the tool to the fixture in one of the following ways:

A: Using the threads at the front part, accessible under the thread protection ring.

B: Using the holes of the tool base.

Four holes are intended for screws and two holes are intended for guide pins.

Connect the tool to the drive using the supplied cable.

NOTICE Make sure the cable is not bent more than a radious of 55 mm (2.2 in).