ABSCO SHEDS CPDW50 조립 및 사용 설명서 - 페이지 7
{카테고리_이름} ABSCO SHEDS CPDW50에 대한 조립 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABSCO SHEDS CPDW50 19 페이지. Skillion carport
페이지 인쇄STEP 1.
JOIN THE EDGE BEAMS AND CROSS
BEAMS TOGETHER WITH THE SPLICE
PLATES, USING M10 x 20 BOLTS,
NUTS AND WASHERS AS SHOWN.
x 4
x 2
x 3
ON THE THREE DOUBLE CROSS
BEAMS AT EACH END, USE THE
PRE-PUNCHED 2610mm SECTION AS A
TEMPLATE TO DRILL FOUR 10mm HOLES INTO
THE 2675mm SECTION. THESE HOLES WILL
LATER BE USED FOR CONNECTION TO
COLUMN TOP BRACKETS.
ABSCO INDUSTRIES
Skillion Carport Model: CPDW50
ASSEMBLY INSTRUCTION MANUAL
Absco Industries
M10 WASHERS
M10 NUT
SPLICE PLATE
INSERT FOUR EXTRA EDGE BEAM
SPLICE PLATES IN THE TWO SIDE
EDGE BEAMS FOR LATER
CONNECTION (REFER STEP 3A)
CARPORT MODEL: CPDW50
M10 x 20 BOLT
CROSS/EDGE BEAM
10-05-2017
PAGE 07