ABSCO SHEDS CPSW33 매뉴얼 - 페이지 11

{카테고리_이름} ABSCO SHEDS CPSW33에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABSCO SHEDS CPSW33 18 페이지. Skillion carport

STEP 6.

YOU WILL REQUIRE ASSISTANCE FROM ANOTHER PERSON TO LIFT THE ROOF STRUCTURE UP.

ABSCO INDUSTRIES

Skillion Carport Model: CPSW33-41

ASSEMBLY INSTRUCTION MANUAL

Absco Industries

PIVOT HOLE CONNECTION.

REFER BACK TO STEP 4. LOCATE ONE M10 x

20mm BOLT, NUT AND WASHER AT EACH END

OF THE CROSS BEAM/COLUMN ASSEMBLY TO

THE PRE-DRILLED HOLE IN THE EDGE BEAM.

ONLY TIGHTEN FINGER TIGHT TO ALLOW THE

SECTIONS TO MOVE DURING LIFTING.

WITH ONE PERSON HOLDING EACH COLUMN,

BEGIN TO LIFT THE ROOF STRUCTURE.

CONTINUE LIFTING THE ROOF STRUCTURE UNTIL

A SECOND BOLT CAN BE FASTENED TO THE

COLUMN TOP BRACKET AND EDGE BEAM.

SECURE AND TIGHTEN ALL FOUR M10 x

20mm BOLTS NUTS AND WASHERS AT

EACH END OF THE CROSS BEAM.

CARPORT MODEL: CPSW33-41

10-05-2018

PAGE 11