Bose L1 Pro32 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Bose L1 Pro32에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose L1 Pro32 24 페이지. Portable line array system
Bose L1 Pro32에 대해서도 마찬가지입니다: 펌웨어 업데이트 (4 페이지), 펌웨어 업데이트 (44 페이지), 예비 기술 데이터 (9 페이지)

페이지 인쇄

PRO.BOSE.COM

Connecting Sources

Channel 1 & 2 Controls

Channel 1 and 2 are for use with microphones, guitars, keyboards,

or other instruments. The channel inputs are suitable for a wide

range of input types and will have the proper gain staging to

minimize noise when the channel volume is set for the desired

output level.

Connect your sound source to the Channel Input with the

appropriate cable.

2. Apply a ToneMatch preset—to optimize the sound of your

microphone or instrument—by pressing the Channel ToneMatch

Button until the LED for your chosen preset is illuminated.

Use MIC for microphones and use INST for acoustic guitars

and other instruments. Use OFF if you do not want to apply a

preset.

Note: Use the L1 Mix app to choose custom presets from the

ToneMatch library. The corresponding LED will illuminate green

when a custom preset is selected.

3. Press the Channel Parameter Control to choose a parameter

to modify. The parameter name will illuminate white while it is

selected.

4. Rotate the Channel Parameter Control to adjust the level of the

selected parameter. The parameter LED will indicate the level of

the selected parameter.

Note: While Reverb is selected, press and hold the control for

two seconds to mute the reverb. While reverb is muted, Reverb

will flash white. To unmute reverb, press and hold for two

seconds while Reverb is selected. Reverb mute will reset when

the L1 Pro is powered off.

Owner's Guide • L1 Pro32 Portable Line Array

Setup

INST

English • 9