Atlas Copco QMC41-50-HM4 제품 지침 - 페이지 4

{카테고리_이름} Atlas Copco QMC41-50-HM4에 대한 제품 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco QMC41-50-HM4 16 페이지.

페이지 인쇄

Product Information

ServAid

ServAid is a portal that is continuously updated and contains Technical Information, such as:

■

Regulatory and Safety Information

■

Technical Data

■

Installation, Operation and Service Instructions

■

Spare Parts Lists

■

Accessories

■

Dimensional Drawings

Please visit: https://servaid.atlascopco.com.

For further Technical Information, please contact your local Atlas Copco representative.

Safety Data Sheets MSDS/SDS

The Safety Data Sheets describe the chemical products sold by Atlas Copco.

Please consult the Atlas Copco website for more information www.atlascopco.com/sds.

Country of Origin

For the Country of Origin, please refer to the information on the product label.

Dimensional Drawings

Dimensional Drawings can be found either in the Dimensional Drawings Archive, or on ServAid.

Please visit:

http://webbox.atlascopco.com/webbox/dimdrw

Overview

Applications

The MicroTorque screw fastening systems are ultra low-torque applications.

Normal Environmental Conditions

This product is designed to be safe under the following conditions:

■

Indoor use

■

Altitude up to 2 000 m

■

Operating temperature +5 °C / +41 °F to +40 °C / +104 °F

■

Storage temperature -25 °C / -13 °F to +60 °C / +140 °F

■

Maximum relative humidity 80 % for temperatures up to 31 °C / 89 °F decreasing linearly to 50 % rel-

ative humidity at 40 °C / 104 °F

■

Mains supply voltage fluctuations up to ±10 % of the nominal voltage

■

Transient overvoltages up to the levels of overvoltage category ll

■

Temporary overvoltages occurring on the mains supply

■

Pollution degree 2

■

Ingress protection rating: IP20

Technical Product Data

Technical Product Data can be found on either ServAid, or the Atlas Copco website.

Please visit:

https://servaid.atlascopco.com

or www.atlascopco.com.

or https://servaid.atlascopco.com.

QMC41-50-HM4