Bose Lifestyle 135 운영 매뉴얼 - 페이지 28

{카테고리_이름} Bose Lifestyle 135에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Lifestyle 135 34 페이지. Soundtouch
Bose Lifestyle 135에 대해서도 마찬가지입니다: 운영 매뉴얼 (34 페이지), 소유자 매뉴얼 (15 페이지), 소유자 매뉴얼 (14 페이지)

페이지 인쇄

ARE AND

AINTENANCE

Problem

TV does not respond to

remote commands

(135 systems only)

Picture is blurry when

viewing 3D content

(135 systems only)

Intermittent bass

(135 systems only)

Sound is marred by a loud

hum or buzz, which may

be electrical in nature (not

harmonic)

Radio does not work

(Not applicable to T20 and

T10 systems.)

FM sound is distorted

(Not applicable to T20 and

T10 systems.)

Sound is distorted

No sound from a con-

nected device

28 – English

What to do

• Make sure the speaker array is not blocking the IR sensor on the TV.

Change the position of the TV and speaker array so that the IR sensor

is not blocked.

• For details on the location of the TV's IR sensor, refer to the owner's

guide that came with your TV.

• Make sure your 3D glasses are tuned on.

• If the problem persists, make sure the speaker array is not blocking the

IR sensor on the TV. Change the position of the TV and speaker array

so that the IR sensor is not blocked.

• For details on the location of the TV's IR sensor, refer to the owner's

guide that came with your TV.

• Check that the status indicator on the Acoustimass

and not blinking.

• If the speaker array status indicator is blinking orange:

• Check that the Acoustimass module is plugged into a live AC wall

outlet and the status indicator is glowing orange.

• Press the Setup button on the control console and select the

"Reconnect Acoustimass" menu item. Follow the on-screen

instructions.

• Try moving any possible sources of wireless interference, such as a

wireless computer network router, another wireless device, or a

microwave oven, further away from the system.

• Contact Bose

Customer Service to determine if and how other

electrical devices in the room may be creating unwanted signals,

and to obtain possible remedies.

• Make sure antennas are connected properly.

• Move AM antenna at least 20 inches (50 cm) from the control console

and Acoustimass

• Adjust antenna position to improve reception.

• Make sure the AM antenna is in an upright position.

• Move antennas farther from control console, TV, or other electronic

equipment.

• Select another station. You may be in an area of weak signal coverage

for some stations.

• Adjust antenna position to reduce interference.

• Fully extend the FM antenna.

• Make sure the audio input cable is not damaged and the connections

are secure on both ends.

• Reduce the volume output level from any external devices connected

to the control console.

• (135 systems only) Remove the protective film from the trim and grille

on the speaker array and the front of the Acoustimass module.

• Check the connections.

• If using a coaxial or optical audio connection, make sure you have

not made both types of connections to the same input on the control

console.

• Make sure that device is turned on.

• Refer to the owner's manual that came with the device.

module.

module is orange