Bose Lifestyle Music Center 운영 매뉴얼 - 페이지 19

{카테고리_이름} Bose Lifestyle Music Center에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Lifestyle Music Center 42 페이지. Home entertainment systems with vs-2 video enhancer
Bose Lifestyle Music Center에 대해서도 마찬가지입니다: 운영 매뉴얼 (48 페이지), 운영 매뉴얼 (48 페이지), 설치 매뉴얼 (38 페이지), 소유자 매뉴얼 (19 페이지), 소유자 매뉴얼 (29 페이지), 설치 매뉴얼 (44 페이지), 소유자 매뉴얼 (42 페이지), 설정 정보 (1 페이지), 소유자 매뉴얼 (26 페이지), 확장 매뉴얼 (38 페이지), 운영 매뉴얼 (48 페이지), 운영 매뉴얼 (46 페이지), 소유자 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (8 페이지), 설치 매뉴얼 (30 페이지), 설치 매뉴얼 (39 페이지)

페이지 인쇄
Bose Lifestyle Music Center 운영 매뉴얼
Controlling
external
sources
Follow the instructions in your Lifestyle®system Installation Guide for connecting
an external
component. Turn on your component
directly or by using its remote control. If you like, you
can program your new Lifestyle ®remote to control most brands of TVs, VCRs, and cable/sat-
ellite control boxes. An infrared (IR) emitter is included behind the media center display to
communicate
with any component your remote is programmed to control.
Programming
your
Lifestyle
remote
to control
your
TV
If you want to control your TV with your Lifestyle ® remote control, you can program it to oper-
ate your brand of TV using the system settings menu. See the "Remote control setup sub-
menu" on page 31.
1.
Turn on your TV.
2.
Press the TV button on the Lifestyle ®remote control.
3.
Press the Settings
button.
4.
Select System Setup and press Enter,
5.
Select Remote
Control Setup and press Enter.
6.
TV Brand is selected first. Press (_
until your TV brand name is shown.
7.
Select TV Device
Code. The first 4-digit device code is shown.
8.
Press TV Power
on the Lifestyle ®remote control to see if the TV turns off.
9.
If you cannot turn off your TV, press
_'_ to choose the next device code, and press the
TV Power button again.
10. Repeat steps 8 and 9 until you find a device code that turns your TV off and on again
when pressing the TV Power button.
Note: Your Lifestyle _ remote can be programmed
to control your VCR or a cab/e/sate/rite con-
tro/ box by foflowing a similar procedure.
Turning
the system
on and selecting
the source
Press the Tape, VCR, or AUX button on the remote or press Source on the media center until
the desired component
is selected. This turns your system on and selects the component
connected to that input. If the system is already on, this button selects the component.
Note: Selecting an external source turns the system on in surround (5-speaker) mode.
Press the Speakers
2-3-5 button to change the number of speakers playing.
The appropriate indicators light up on the media center when the system is on and the com-
ponent is selected.
17