Bose ShowMatch SM10 사용 및 응용 매뉴얼 - 페이지 9

{카테고리_이름} Bose ShowMatch SM10에 대한 사용 및 응용 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose ShowMatch SM10 28 페이지. Deltaq array loudspeakers
Bose ShowMatch SM10에 대해서도 마찬가지입니다: 설치 및 안전 매뉴얼 (16 페이지)

페이지 인쇄

In rental and touring applications the DeltaQ concept offers the same consistency of coverage and response across the

coverage area, and in smaller, low-ceiling applications this concept can be used to deploy smaller arrays, which deliver

wide vertical coverage, as compared to arrays constructed of traditional line array modules.

A typical rental inventory includes all the fundamental components to build arrays of various sizes and output levels.

These components can be easily mixed and matched, transported, and configured for different applications.

Each array is comprised of three primary components:

Far Throw array sections are comprised of SM5 modules with a 70-degree horizontal coverage angle. The overall

size and throw distance required for the application will determine the quantity of modules configured in this way.

Mid Throw array sections constitute the main portion of the array and are comprised of SM5 modules with a

100-degree horizontal coverage angle.

Downfill Transition is the final section of the array and uses four modules to deliver 40 degrees of vertical coverage

to the nearest audience area. This is accomplished with two SM5 modules, one SM10 module, and one SM20

module, where all modules have a 100-degree horizontal coverage angle.

Far Throw

4x SM5 with 70° horizontal

Mid Throw

4x SM5 with 100° horizontal

Downfill

2x SM5, 1x SM10, 1x SM20, all

with 100° horizontal with 70° horizontal

Typical ShowMatch array for outdoor concert supporting an audience of up to 5,000 people.

In low-ceiling applications, a DeltaQ array can be

deployed to deliver an array with a wide vertical

coverage angle using fewer modules than traditional

systems. In applications where the SPL level can be met

with this approach, a DeltaQ array offers the following

advantages:

Reduced array weight

Improved sight lines

Reduced set-up and installation time

For a detailed technical explanation of DeltaQ arrays see the AES paper "The influence of the directional radiation performance of the

individual speaker modules, and overall array, on the tonal balance, quality and consistency of sound reinforcement systems,"

presented at the 131st AES Convention in New York City, October, 2011.

50° vertical coverage

in both arrays

PRO.BOSE.COM

SYSTEM SOFTWARE

EASE Focus

EASE Focus 3 software allows 3D modeling of audience areas, predictions of acoustic direct-field coverage, sound

levels, and frequency response.

Once an array has been created, inter-box splay angles may be configured manually or using automated splay

calculation. SMS118 cardioid subwoofer presets are available within the software for the creation of cardioid

subwoofer arrays.

At the completion of the design a customizable report can be generated which contains the necessary details for

proper placement, aiming and configuration of array parameters.

The Bose ShowMatch GLL files are licensed to allow use in both Focus and "full" EASE software.

PRO.BOSE.COM