Bose Sub1 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Bose Sub1에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Sub1 6 페이지. Powered bass modules
Bose Sub1에 대해서도 마찬가지입니다: 펌웨어 업데이트 (4 페이지), 펌웨어 업데이트 (44 페이지), 소유자 매뉴얼 (14 페이지), 매뉴얼 (2 페이지)

페이지 인쇄

Architect and Engineer Speciﬁcation

The sub shall be a single-driver, subwoofer with internally-supplied power amplification and active equalization

for multiple operating modes as follows:

The sub shall consist of a modular 7" x 13" (177 mm x 330 mm) RaceTrack low-frequency driver mounted in a

ported bass enclosure.

The nominal horizontal beamwidth of the loudspeaker shall be omnidirectional, with a –10 dB rear rejection

when in Cardioid mode. The nominal vertical coverage shall be 0°. The power amplification for transducers

shall be supplied by an integral single-channel onboard amplifier providing 480 W for the low-frequency

transducer.

The onboard digital mixer shall consist of two input channels. Each input channel shall provide two

combination XLR or 1/4" TRS connectors (line-level) with selectable equalization presets for low-pass filter and

L1 optimization. Each input channel shall also provide an XLR balanced line-level connector with selectable

equalization presets for full bandwidth, high-pass filter, and S1 Pro optimization. The digital mixer shall provide

master output level control and phase/pattern control for positive polarity, negative polarity, and Cardioid

mode. The sub shall provide multi-pin SubMatch input and output connectors to receive power from L1 Pro32

and send power to another Sub1/Sub2 with a Bose SubMatch cable.

The enclosure of the sub shall be constructed of high-impact polypropylene and birch plywood.

provide a pole-mount M20 threaded insert for use with the Bose Sub1/Sub2 Adjustable Speaker Pole. The sub

shall provide four interlocking feet on each side for stacking with one other Sub1.

The sub's dimensions shall be 21.0" H × 10.2" W × 20.8" D (533 mm × 260 mm × 529 mm). Its net weight shall

be 34.1 lbs (15.5 kg).

The sub shall be the Bose Sub1 portable powered bass module.

Safety and Regulatory Compliance

The Sub1 powered bass module complies with the following standards:

• UL/IEC/EN62368-1 Audio/Video, Information and Communication Technology Equipment

• Ecodesign Requirements for Energy Related Products Directive 2009/125/EC

• Radio Equipment Directive 2014/53/EU

• CAN ICES-3 (B)/NMB-3(B)

• FCC Part 15 Class B

Bose, L1, and ToneMatch are trademarks of Bose Corporation. All other trademarks are the property of their

respective owners.

For additional specifications and application information, please visit PRO.BOSE.COM.

Specifications subject to change without notice. 6/2021

PRO.BOSE.COM/L1

The sub shall

OF 6