ABSCO SHEDS EZISLIM 08081H HIGHSLIM 조립 지침 매뉴얼 - 페이지 7

{카테고리_이름} ABSCO SHEDS EZISLIM 08081H HIGHSLIM에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABSCO SHEDS EZISLIM 08081H HIGHSLIM 18 페이지. Shed

ABSCO ASSEMBLY INTRODUCTION

The snap-tite assembly system locks most perimeter channels to all roof and wall

sheets without the need for tools and fasteners. The front door frame and door

assembly will require 3mm holes to be drilled where necessary.

PUSH

Position sheets on timbers,

trestles or partly over edge of

concrete slab.

FASTENING SYMBOLS

Join components together with one screw at this

location only, as some channel sections have extra

holes that are not required for this model of garden

shed

Do not join components together at this location yet,

as the screw may obstruct further assembly of other

components

ABSCO INDUSTRIES

Absco EZISLIM Shed

Model: 08081H HIGHSLIM

To pre-assemble the four wall panels

and two roof panels, the perimeter

channels are secured to the top and

bottom of each panel using the

snaptite system, as detailed on the

following pages wherever you see

the symbol.

SNAP

PUSH

ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12

T TE

After joining sheets together,

position channel over one end of the

sheets, gently tapping it over the

snaptite lugs, working along the

sheets to the other end.

Each perimeter channel must finish flush

with the edges of the sheets. the snap-tite

system allows adjustment for this

process by simply tapping the channel

along the sheets until each end is neatly

flush.

3mm POP RIVETS

4mm NUT & BOLT SET

PAGE 7