Bose WAVE RADIO III 소유자 매뉴얼 - 페이지 16

{카테고리_이름} Bose WAVE RADIO III에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose WAVE RADIO III 24 페이지. Owner's guide
Bose WAVE RADIO III에 대해서도 마찬가지입니다: 소유자 매뉴얼 (28 페이지), 소유자 매뉴얼 (28 페이지), 소유자 매뉴얼 (26 페이지), 소유자 매뉴얼 (28 페이지), 서비스 매뉴얼 (10 페이지)

Bose WAVE RADIO III 소유자 매뉴얼
P
Y
W
ERSONALIZING
OUR

Adjusting the snooze time

This setting determines the duration of time the system
remains silent when the snooze function is activated.
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
2. Press Tune/Playlist
SNOOZE- 10 MIN is displayed.
3. Press Time – or Time + to change
the snooze time to 10-60 minutes (in
10-minute increments).
4. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.

Turning RDS on or off

This setting enables or disables your system to display
RDS information. The RDS is a system that transmits
useful information, such as station name, program
information and the current time. RDS is used only on
FM and RDS information is displayed only if it is included
in the FM broadcast signal.
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
2. Press Tune/Playlist
RDS- is displayed.
3. Press Time – or Time + to select
OFF or ON.
4. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
16 – English
®
R
III
AVE
ADIO
>
once until
>
two times until

Changing the time format

You can choose to have the display show the time in
12-hour (AM/PM) or 24-hour time.
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
2. Press Tune/Playlist
until TIME- is displayed.
3. Press Time – or Time + to select 12
HOUR or 24 HOUR.
4. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
Adjusting the display
brightness
The brightness level of the display automatically adjusts
itself for low and high ambient light conditions. This
feature brightens the display for better visibility in high
ambient light conditions and dims the display making it
less intrusive in low ambient light conditions. High and
low brightness settings can be set independently.
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
2. Press Tune/Playlist
until BRIGHT HI- is displayed.
3. Press Time – or Time + to set the
high display brightness level to a
value from 8-15.
4. Press Tune/Playlist
BRIGHT LO- is displayed.
5. Press Time – or Time + to set the
low display brightness level from 1-8.
6. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
>
three times
>
four times
>
once until