Advanced Radiant Systems COOL-SPACE CS5-16 운영 및 유지보수 매뉴얼 - 페이지 10
{카테고리_이름} Advanced Radiant Systems COOL-SPACE CS5-16에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Advanced Radiant Systems COOL-SPACE CS5-16 16 페이지.
페이지 인쇄6.1 Troubleshooting (continued)
The water distribution system consists of two (2) assemblies:
o The Water Inlet Assembly
o The Hose and Valve Assembly
Problem
Floor at side of COOL-SPACE
unit is wet
®
COOL-SPACE
unit overflows
from reservoir or is spitting water
through fan.
Water spitting from the unit.
Water leaking from drain plug.
Water leaking from water flow
control valve.
Too many dry streaks in the
pads.
Water System
Brass bulkhead fitting
Float valve connection hose
Float valve assembly
Spray Bar Assembly
Valve Assembly
Connection Hose
®
Water inlet hose is loose at
supply hose or inlet hose is
loose at bulkhead fitting.
Float valve hose is loose at
bulkhead fitting or at float valve.
Water pressure is too high to
allow float valve to shutoff (8 bar
max).
Float valve is not seating
properly.
Flow control
Cracked Hose & Valve
Assembly.
Hose connection loose
For worn washer, worn stem.
Make sure drain valve is closed
Washer worn. Stem worn.
Jam nut or lock nut loose.
Holes in spray bar blocked.
Adjust water flow.
Check
8
Solution
Tighten connections and/or
replace hose washers.
Tighten connections and/or
replace hose washers. Reduce
water pressure by adding an
inline reducer. Check float valve.
Replace float orifice. Check all
hoses for leaks.
Reduce flow
Replace Hose & Valve
Assembly.
Tighten hose.
Replace washer.
Replace drain plug.
Replace water flow control
valve. Tighten Jam nut.
Remove spray bar. Remove
plug and clean tube and holes.
Open water flow control valve.