Bose BLUETOOTH HEADSET 2 SERIES 소유자 매뉴얼 - 페이지 23

{카테고리_이름} Bose BLUETOOTH HEADSET 2 SERIES에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose BLUETOOTH HEADSET 2 SERIES 32 페이지. Bluetooth headset series 2
Bose BLUETOOTH HEADSET 2 SERIES에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (16 페이지), 매뉴얼 (2 페이지), 배터리 교체 지침 (2 페이지), (영어) 사용자 가이드 (32 페이지)

페이지 인쇄
Bose BLUETOOTH HEADSET 2 SERIES 소유자 매뉴얼
English
Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16
The mobile
phone and the
headset do not
connect.
What you
hear on the
headset is not
clear.
• Make sure both devices are turned on and
®
Bluetooth
connectivity is enabled on the
phone.
• Turn the headset off, then on again. Make sure
the mobile phone is within 33 feet (10 meters)
of the headset.
• Check the Bluetooth device list on your phone
to be sure Bose BT2 is selected.
– If it is selected, delete it from the list (refer to
your phone instruction manual for details).
– If it is no longer listed, repeat "Additional
pairing" on page 13.
• Simultaneously hold Call and Volume – for
5 seconds to reset the memory, and pair the
headset to the phone again.
• Turn the phone power off, then on again.
• During a call, adjust the volume on your
mobile phone or on the headset by pressing
Volume + or – .
• Check your mobile phone signal strength.
• Make sure the mobile phone is within 33 feet
(10 meters) of the headset.
• Reposition the headset. Refer to "Fitting" on
page 14.
• Clean the wire mesh under the tip. See page 26.
Tab 5, 11
Tab 6, 12
23