Atlas fan company ALESSANDRA-LK 사용 설명서 - 페이지 12

{카테고리_이름} Atlas fan company ALESSANDRA-LK에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas fan company ALESSANDRA-LK 15 페이지. 42", 56" & 72" ceiling fan

NOTE: The learning frequency function and self calibration test will continue to retain the last set

frequency and calibration set even when the AC power is shut off. If the frequency is changed the self

calibration test will occur again.

This receiver provides the following protective function:

1. Lock Rotor Position: The DC motor has a built-in safety against a stalled or locked rotor condition

(stalled blade rotation). If there is an obstruction or fault with the motor, the current monitoring function

will automatically turn power off to the motor after 30 seconds. Remove the obstruction and turn the AC

power off. Restore power and re-start fan motor.

2. Over 80W protection: When the receiver detects motor power consumption which is greater than 80W,

the receiver power will be stopped and operation will immediately discontinue. Wait for 5 seconds and

then turn the receiver power back on.

OPERATING YOUR FAN AND REMOTE

CONTROL

A. 1, 2, 3, 4, 5 and 6 button:

These six buttons are used to set the fan speed as

follows:

1 = minimum speed

2 = low speed

3 = medium low speed

4 = medium speed

5 = medium high speed

6 = high speed

button:

This button turns the fan off.

Reverse button:

This button is to control fan direction

Correlated Color Temperature (CCT) changing.

Push and release the button to cycle through the

five color temperature options.

Option 1: 2700K ((Warm White).

Option 2: 3000K (Soft White).

Option 3: 4000K (Neutral White).

Option 4: 5000K (Bright White).

Option 5: 6500K (Daylight).

NOTE: The default temperature of the ceiling fan

light is 2700K (Warm White).

light button

Press and release the light button to turn the light on

or off. Press and hold to activate the dimmer

function.

Figure 19