Bose QuietComfor 3 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Bose QuietComfor 3에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose QuietComfor 3 45 페이지. Acoustic noise cancelling headphones

Using Your Headphones

Wearing your headphones

You can use your headphones only for noise reduction or for listening to audio along

with the benefit of noise reduction.

As you put on the headphones, observe the L (left) and R (right) markings that identify

the left and right earcups. Adjust the headband so it rests gently on top of your head

and the earcup cushions fit comfortably on your ears.

Using your headphones for audio with noise reduction

For listening to an audio source, you need to use the supplied headphones cord.

Plug the appropriate end of the head-

phones cord into the left earcup.

Plug the other end of the cord into the

audio device (see "Connecting to porta-

ble and home audio devices" on page 8).

Turn on the audio device, making sure

the volume is initially set to a low level.

Turn on your headphones. The power

switch indicator should light.

Set the volume level using the volume

control on the audio device.

Using your headphones only

for noise reduction

When using the headphones just for noise

reduction, you do not need to connect the

headphones cord. Just turn on your

headphones and put them on your head.

When the battery needs charging

• When the power switch indicator starts flashing the battery is in a low-charge state.

From the moment the indicator starts flashing, the battery has about four hours of

life left.

• When replacing a battery, make sure you charge the new battery for a minimum of

two hours. See "Charging the battery" on page 5.

• Before storing the battery for an extended period of time, fully charge the battery to

maximize its life.

Using Your Headphones

Left

earcup

Headphones

cord

Power switch

indicator

Right earcup