Bose Acoustimass16 Series II 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Bose Acoustimass16 Series II에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Acoustimass16 Series II 15 페이지. Home entertainment speaker system
Bose Acoustimass16 Series II에 대해서도 마찬가지입니다: 소유자 매뉴얼 (24 페이지)

페이지 인쇄

English

Español

Troubleshooting

Problem

System does not function

at all

No sound

No surround sound

No bass

Not enough or too much

bass

Sound is distorted

Customer service

Cleaning the speakers

Français

If you have a problem with your Acoustimass

and try the following solutions. If you still have a problem, contact your Bose

arrange for service. To contact Bose directly, refer to the address list included in the carton.

What to do

• Make sure the receiver and powered Acoustimass module are plugged into an operating

AC outlet and that the receiver is plugged in and turned on.

• Be sure to select an audio source on the receiver (video, CD, DVD, tuner).

• Increase the volume.

• Disconnect any headphones.

• Check the speaker connections.

• Make sure that both the powered Acoustimass module and the receiver are plugged in.

• For digital sound, be sure a coaxial or optical cable connects the digital output of the

DVD player with the digital input on your receiver.

• Be sure the audio source selected is correct. For example, select DVD audio on your

receiver to hear the DVD sound.

• Make sure the source material contains surround sound.

• If you are using the Dolby Pro-Logic mode on your receiver, make sure surround sound

is turned on.

• Be sure the source material (DVD, laser disc, or broadcast programming) is Dolby Digital

encoded.

• Be sure your receiver is processing a signal from a Hi-Fi VCR, stereo TV, laserdisc, or

DVD player, or other surround sound source.

• If you are using digital programming, verify that the settings are correct at the receiver.

• Be sure the speaker connections from the receiver to the amplifier are in the correct

phase, red collared wired to red jack (+ to +).

• Move your Acoustimass module closer to a wall or corner to increase bass. Move it

farther from a wall or corner to decrease bass.

• Adjust the LFE level or Room Compensation control.

• Make sure your speaker wire is not damaged.

• Reduce the volume of external components connected to the receiver.

For additional help in solving problems, contact the Bose Customer Service office appropri-

ate to your area. See the address list included in the carton.

The cabinets of your Acoustimass speaker system may be cleaned only with a soft dry cloth.

Do not use any sprays near the system or allow liquids to spill into any openings. Also, do not

use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.

The grille assemblies on the cube arrays may be carefully vacuumed, if necessary. Please

note that the drivers are located directly behind the grille cloth and are easily damaged if

reasonable care is not taken.

speaker system, turn off your sound source

EFERENCE

dealer to