Bose CINEMATE 1 SR 운영 매뉴얼 - 페이지 5

{카테고리_이름} Bose CINEMATE 1 SR에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose CINEMATE 1 SR 44 페이지. Home theater speaker system
Bose CINEMATE 1 SR에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지), 설정 매뉴얼 (20 페이지), 설정 매뉴얼 (40 페이지)

페이지 인쇄

3. Press and hold

light. The remote is now in the setup mode.

4. Press

. Only this button will remain lit.

5. On the number keypad, enter the device code for

your brand of TV. The TV source button (

should blink twice and then turn off.

Note: If all five source buttons flash rapidly three times,

the code was invalid. Go back to Step 1 and try another

code.

6. Point the remote at your TV and press TV power.

TV power

If your TV does not respond, go back to Step 1 and

try another code.

To program the remote to control other devices:

Follow the same procedure for each of your other

devices, using the appropriate device code and

source button for each one.

To control a combination device:

• If you are programming the remote to control a

combination device that has more than one source,

such as a VCR/DVD unit, you can program the associated code for either source

button. For convenience, you may want to program the code twice – once for the

VCR button and once for the DVD button.

• To find the right device code, first search the "COMBINATION" listings in the

Universal Remote Device Codes book. If you cannot find a valid code there,

then search the listings for individual device types (TV, CBL, VCR, DVD, etc.).

until all five source buttons

ONTROLS AND

)

NDICATORS

Source buttons

Source power buttons

English – 5