Bose CineMate 120 소유자 매뉴얼 - 페이지 23
{카테고리_이름} Bose CineMate 120에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose CineMate 120 32 페이지. Soundtouch series ii wireless adapter
Bose CineMate 120에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지), 소유자 매뉴얼 (22 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
Source selection
You can switch between sources by pressing the appropriate source button on the
remote control. Before you begin, program the remote to control your source
(see page 22).
Select a source connected to the system
If your source is connected to the console and does not use CEC, follow this
procedure to set the console to the appropriate mode and turn on the source.
1.
Power on the system.
2.
Press the button for the source you want to control.
The source button glows.
3.
Press
The source powers on.
Select a source connected to your TV
If your source is connected to your TV, follow this procedure to select the
appropriate TV input.
1.
Power on the system, your TV and the appropriate source.
2.
Press
You may need to press
the source.
On some TVs,
correct TV input and close this menu.
Universal source buttons and
console connectors
The source buttons on your remote control correspond with the connectors on the
back of the console. For example,
connector.
Your source buttons work with any source that is connected to the corresponding
connector. If you have a secondary DVD or Blu-ray Disc
the CBL-SAT connector, it can be programmed to work with
If you are using the optical, coaxial, or analog connectors, you must set the input
for the appropriate source. You can access these settings using the System menu
(see page 25).
.
to select the correct input on your TV.
several times to select the TV input for
displays a menu. Use the remote control to choose the
Using the System
corresponds with the BD-DVD HDMI
player and connect it to
™
.
English - 23