Bose CineMate 120 소유자 매뉴얼 - 페이지 29
{카테고리_이름} Bose CineMate 120에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose CineMate 120 32 페이지. Soundtouch series ii wireless adapter
Bose CineMate 120에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지), 소유자 매뉴얼 (22 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
Problem
What to do
Poor or
• Remove all protective films from the system.
distorted
• Secure all cable connections on the soundbar, TV, and connected sources.
sound
• If you see the error message Cannot find Acoustimass:
- Plug in the Acoustimass
- Pair the Acoustimass module with the console (see "If your console
• If using the analog or
• Factory reset the system (see page 30) and run the ADAPTiQ
calibration (see page 18).
Intermittent
• Secure all cable connections on the soundbar, TV, and connected sources.
sound
• Move system away from potential interference, such as a wireless router,
cordless phone, television, microwave, etc.
If your console cannot find the Acoustimass
The Acoustimass module and console are paired at the factory. However, if you
see the error message Cannot find Acoustimass on the display, perform this
pairing procedure:
1.
Unplug the Acoustimass module.
2.
Press
on the remote control.
3.
until 15 PAIR ACOUSTIMASS appears on the display.
Press
4.
Press
.
Plug in Acoustimass appears on the display.
5.
Plug the AC power cord into an AC (mains) outlet.
After the Acoustimass module connects to the console, Pairing complete
appears on the display.
cannot find the Acoustimass
Care and Maintenance
module.
®
module").
®
connector, decrease the volume on your source.
audio
®
module
®
English - 29