Bose CineMAte 520 사용자 설명서 - 페이지 27
{카테고리_이름} Bose CineMAte 520에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose CineMAte 520 49 페이지. Soundtouch series ii wireless adapter
Bose CineMAte 520에 대해서도 마찬가지입니다: 소유자 매뉴얼 (34 페이지), 사용자 설명서 (6 페이지), 소유자 매뉴얼 (22 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
Getting System Information from the Display
Understanding messages on the display
The display on the front of the console allows you to access the System menu and
shows system information and icons.
Using the System menu
Use the System menu to adjust audio levels, turn on/off features (such as
AUTO OFF), change the language, set the coaxial, analog and optical inputs for a
particular source, run ADAPTiQ
or factory reset the system.
1.
Press
on the remote.
2.
Press
and
to scroll through the System menu.
3.
Press
and
to adjust the settings.
4.
Press
.
Display
1 AUDIO COMP
2 AUDIO/VIDEO SYNC
3 HDMI-CEC
4 AUTO OFF
5 SIDE AUX
6 BASS LEVEL
7 TREBLE LEVEL
8 CENTER LEVEL
26 - English
®
, pair your Acoustimass
System state
Off: (Default) No change to audio track.
Enhance dialogue: Increases the level of dialogue and
sound effects at low volume settings while
providing full audio impact at high volume settings.
Smart volume: Reduces the range of volume levels in a
movie soundtrack so the difference between extremely
loud outbursts and soft sounds is less noticeable.
Adjusts the audio delay to synchronize audio and video.
On: (Default) Enables CEC (see page 21).
Off: Disables CEC.
Enable: (Default) The system powers off after sixteen
minutes of inactivity (no sound coming from the system).
Disable: The system will not automatically power off.
Audio in: (Default) Sets the
source.
Headphones: Sets the
input.
Note: If set to Headphones input and a cable is
connected, the speakers are muted.
Disconnect your headphones when not in use.
Adjusts bass level.
Adjusts treble level.
Increases or decreases the level of dialogue for movies
and TV.
®
module with the console
connector for an auxiliary
connector as a headphones