Bose Lifestyle 28 Series II 운영 매뉴얼 - 페이지 20

{카테고리_이름} Bose Lifestyle 28 Series II에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Lifestyle 28 Series II 44 페이지. Dvd home entertainment system
Bose Lifestyle 28 Series II에 대해서도 마찬가지입니다: 설치 매뉴얼 (42 페이지), 설치 매뉴얼 (36 페이지), 소유자 매뉴얼 (25 페이지), 소유자 매뉴얼 (24 페이지), 소유자 매뉴얼 (13 페이지), 빠른 설정 매뉴얼 (3 페이지), 운영 매뉴얼 (44 페이지)

Bose Lifestyle 28 Series II 운영 매뉴얼
Controlling External Sources
Figure 6
Changing the TV Power
20
7. Set the TV to turn on automatically*, as needed:
• Move up to the System menu categories and over to Video (Figure 6).
• From the Video options, select
• Move right into the list of choices and up or down to select one of the two below:
-
(for TV models that do not use a European style SCART connector)
Automatic
-
(for TV models that use a SCART connector)
Euro Connector
• Press the Enter button.
Video
TV Power:
TV Power Status:
TV Aspect Ratio:
Widescreen DVDs:
Video Connector:
Video Black Level:
The Media Center can turn your TV on automatically whenever
you select a video source.
navigate
*For the Automatic feature to work effectively with North American TV models, the optional
TV sensor must be installed and positioned to detect if the TV is on or off. In Europe, a
SCART connector serves this purpose. If you do not use a SCART connector, or the TV sen-
sor is not positioned properly, the automatic feature is not an option. In that case, leave the
TV power set to Manual. This means you must turn your TV on using its power button or with
the LIFESTYLE
®
remote (when it is set to do so).
8. Notice the
TV Power Status
means the installed TV sensor is working.
TV Detected
means the TV sensor (if installed) is not positioned properly, or a
TV Not Detected
SCART connector is installed.
• Press System or Exit to leave the System menu.
Note: For information on using the TV sensor, refer to "Installing the TV on/off detector" in your
Installation Guide. To check for positioning of the sensor, refer to "The media center" on page 10
.
TV Power
Manual
TV Not Detected
- -
- -
Component
Normal
select
: