Bose Lifestyle V20 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Bose Lifestyle V20에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Lifestyle V20 25 페이지. Personal music center ii - owner's guide
Bose Lifestyle V20에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지), 소유자 매뉴얼 (13 페이지), 소유자 매뉴얼 (30 페이지)

페이지 인쇄

English

Español

Enjoy your wireless entertainment

Français

The transmitter Channel button

You can use the Channel button to narrow the selection of frequencies the transmitter uses.

The transmitter is factory set to avoid WiFi channel 6. This helps prevent performance prob-

lems, such as slow or intermittent data transmissions, on a wireless network. If you have a

wireless network set up on another channel, you can set up your transmitter to avoid that

channel, or you can move the WiFi network to channel 6.

To reserve a channel for use by your WiFi network:

1. Press and hold the Channel button for more than 3 seconds to reach the setting for NO

WIFI NETWORK. The Status LED blinks red three times to confirm this move.

2. In the grouping below, locate the channel used by your nearby WiFi network:

NO WIFI NETWORK...6...11...1...2...3...4...5...7...8...9...10.

3. Count the number of forward moves it takes from the NO WIFI NETWORK setting to

reach your WiFi network channel. For example, if your WiFi network uses channel 3, you

need to move forward 5 times to reserve channel 3 for WiFi network use only.

4. Press the Channel button for less than 3 seconds for each forward move. Repeat as

many times as needed to reach the channel you want to reserve. The Status LED will

blink red to confirm each move.

If the WiFi network channel is unknown to you, use the Channel button to switch off one

channel at a time. Test the WiFi network to see which setting gives you the best effect.

If you do not have a WiFi network in your home:

Follow Step 1 above to use the entire frequency band and maximize transmitter

performance.

Your Bose

link expansion room remote control

• Room code

If you have more than one LIFESTYLE

used in each one has a unique room code.

• House code

The house code setting on the remote must match the setting on your LIFESTYLE

It may not match if you changed the system house code due to interference with another

system.

For information on these house code and room code settings and how to change them, refer

to the owner's guide that came with your remote.

Note: Setup codes for the transmitter and receiver, which must be identical to each other, do

NOT need to match house codes on the remote or LIFESTYLE

Your Bose link expansion room product

• Room code

Make sure the system, amplifier, or powered speaker room code setting matches that of

the remote you are using in the expansion room.

For information on room code settings and how to change them, refer to the owner's guide

that came with your Bose

With the settings confirmed, your Bose link AL8 Homewide Wireless Audio Link is ready for

use. To explore and enjoy all of the capabilities provided by your expansion products, refer to

the owner's guide provided with each product.

system expansion room, make sure the remote

link product.

system.

ETUP