Bose VideoWave III 운영 매뉴얼 - 페이지 16
{카테고리_이름} Bose VideoWave III에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose VideoWave III 38 페이지. Bose soundtouch wireless adapter owner's guide
Bose VideoWave III에 대해서도 마찬가지입니다: 설정 매뉴얼 (20 페이지), 소유자 매뉴얼 (14 페이지)
페이지 인쇄
Controlling Your Sources
Entering channel numbers
The numbers along the top of the control frame appear for any
source that uses a keypad on an infrared (IR) remote control.
Although these controls are primarily used for entering channel
numbers for a set-top box, you can use them to select chapter
numbers for a DVD player or track numbers for a CD player.
When you enter a number, it appears in a queue on the screen.
The number of digits the queue can hold is set at the factory to
a maximum of 3 digits. If your set-top box requires a different
number of digits for channel numbers, you can change this in
the Options menu (page 24). For example, if you need to enter
channel numbers as high as 9999, you will need to change the
number of digits to 4. If your set-top box only goes up to channel
99, then you should set the number of digits to 2.
To enter a channel number:
1.
Using the click pad remote control, select the first digit of
the channel number.
The channel number queue appears on the screen
containing the first digit.
2.
Select the remaining digits and add them to the queue.
16 - English
3.
After selecting the last digit, wait for the queue to shift the
numbers to the left, indicating that they are being sent to the
source.
Or,
Press the OK remote control button to send the numbers
immediately.
Channel number queue