Bose Acoustic Wave music system II. 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Bose Acoustic Wave music system II.에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Acoustic Wave music system II. 30 페이지. Owner's guide
Bose Acoustic Wave music system II.에 대해서도 마찬가지입니다: 소유자 매뉴얼 (28 페이지), 소유자 매뉴얼 (30 페이지), 소유자 매뉴얼 (20 페이지), 사용자 설명서 (25 페이지), 소유자 매뉴얼 (13 페이지), 소유자 매뉴얼 (6 페이지), 소유자 매뉴얼 (2 페이지), 빠른 설정 매뉴얼 (2 페이지), 소유자 매뉴얼 (30 페이지), 소유자 매뉴얼 (12 페이지), 소유자 매뉴얼 (29 페이지), 소유자 매뉴얼 (29 페이지), 소유자 매뉴얼 (30 페이지)

페이지 인쇄

Bose Acoustic Wave music system II. 소유자 매뉴얼

English

Español

Buttons to use while you listen

There are two circular button sets for use while listening to a

source. For details on how each button works for a specific

source, refer to "Listening to Your LIFESTYLE

page 10.

10.

Français

Use this button set to:

1. Adjust the speaker volume up or down.

2. Establish and select presets.

3. Skip and scan forward and back.

4. Begin or pause play.

Use the second button set while listening to a music disc or

stored music (if available on your system).

5. Each press of the top button moves from normal play to the

next* play mode in the following order:

*Modes above apply to LIFESTYLE

apply to another Bose

source.

Use the remaining buttons in this circular set only with stored

music, available on LIFESTYLE

Use these buttons with your stored music to:

6. Select the uMusic

LIFESTYLE

system if it is off.

7. Hear all other tracks from the CD that provided the current

track.

8. Rate the track that is playing, or multiple tracks or CDs

selected in the Music Library.

9. Hear the tracks that are included in the Playlist or add a

selection to the Playlist.

10. Hear music that is similar in mood and style to the track that

is playing.

Mutes and unmutes the speakers in the room where the

PERSONAL

music center II is used.

When pressed and held, mutes all speakers connected to the

LIFESTYLE

system.

When pressed and held again, unmutes them.

system CD play; they may not

system used as an expansion room local

38 and 48 systems.

system stored source and turn on the

REPARING FOR

System" on