Bose FreeSpace E-4 소유자 매뉴얼 - 페이지 14
{카테고리_이름} Bose FreeSpace E-4에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose FreeSpace E-4 15 페이지. Business music system
Bose FreeSpace E-4에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지), 빠른 시작 매뉴얼 (4 페이지), 소유자 매뉴얼 (14 페이지), 소유자 매뉴얼 (19 페이지)
페이지 인쇄
4.7.11 ZONE 4 LINE OUT output
The ZONE 4 LINE OUT jack provides a line-level output that
duplicates the program material on LINE 4. This may be used to
feed another Bose
®
amplifier installed for a large zone. The 12V
control output is used to connect to Bose amplifier sequence
inputs.
Source Connector
S
S
RCA
T
T
1
3
1
2
2
XLR
3
T
R
S
Phone
Plug
(Balanced)
T
S
Phone
Plug
(Unbalanced)
Control Signal
Bose 1600, 1800 or M2150 Amplifier
4.0 Hardware Installation
E-4 ZONE 4 LINE OUT
12V
12V
S
R
T
12V
S
T
12V
12V
33 of 76
4.8 AC power connections
Installer's Note: The fuse box configuration must be coor-
dinated with the 70/100V OUTPUT VOLTAGE setting: 70V
should be selected for 100-120VAC; 100V should be
selected for 220-240VAC.
Fuse box configuration
The fuse box is configured at the factory according to the specifi-
cations of your order. Should you need to replace the fuse, follow
these steps:
1.
Using a thin screwdriver blade, open the fuse box. Pull out
the drawer and remove the fuse.
2.
Insert a new fuse of the same type and rating into the fuse
box drawer.
3.
Slide the fuse box drawer back into the fuse box.
AC power cord receptacle
Insert the proper power cord for the voltage used in your region.
Power cord
receptacle
Voltage
selection
indicator
Fuse