Bose Lifestyle Music Center 설치 매뉴얼 - 페이지 23

{카테고리_이름} Bose Lifestyle Music Center에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Lifestyle Music Center 38 페이지. Home entertainment systems with vs-2 video enhancer
Bose Lifestyle Music Center에 대해서도 마찬가지입니다: 운영 매뉴얼 (48 페이지), 운영 매뉴얼 (48 페이지), 소유자 매뉴얼 (19 페이지), 소유자 매뉴얼 (29 페이지), 설치 매뉴얼 (44 페이지), 소유자 매뉴얼 (42 페이지), 설정 정보 (1 페이지), 소유자 매뉴얼 (26 페이지), 확장 매뉴얼 (38 페이지), 운영 매뉴얼 (42 페이지), 운영 매뉴얼 (48 페이지), 운영 매뉴얼 (46 페이지), 소유자 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (8 페이지), 설치 매뉴얼 (30 페이지), 설치 매뉴얼 (39 페이지)

English

Español

Français

2. Put on the headset so it rests above your ears. In this position, it can listen (as you would)

and take sampling measurements in your room during the ADAPTiQ audio calibration

process.

3. Follow the calibration process as directed on the TV screen.

Save the headset for possible future use

When you have played both discs and followed their instructions, the installation of your

LIFESTYLE

DVD system is complete and its performance is tailored to the placement of your

system and your listening area.

You may want to customize your system again if you move it to another room or significantly

change the arrangement of the room by relocating furniture, the speakers, or the

Acoustimass

module. You can repeat the steps in "Making sure the sound is as good as it

gets" on page 21 at any time.

Keep the headset and discs together in their original carton and store them in a safe location.

Where to go from here

This completes the basic connection of your system and TV. Now you can:

• Refer to the Operating Guide for details on how to select system options and use the

controls for the fullest enjoyment of your home theater system as it is set up.

• Or, while the media center control panel is still readily available, you may want to install

the TV on/off sensor. Read the next section on this page to determine if you will

use the sensor.

• Or, if you prefer to add other components to the system now, continue with instructions

in "Connecting other components to the system" on page 27.

The TV on/off sensor enables the system to automatically turn the TV on, as needed, when

another video source (DVD, cable/satellite box, etc.) is selected. If you choose not to use the

sensor, you need to turn on your TV separately. See Figure 21.

Note: The TV on/off sensor is not included on LIFESTYLE

connectors.

With larger TVs you may want a second person to help as you follow the steps below:

1. Plug the sensor cord connector into the TV SENSOR jack on the media center.

2. Temporarily position the TV on/off sensor on the back of your TV as shown in Figure 21.

Note: On a projection TV, the best place to mount the sensor is on the bottom rear of the

projector chassis. Front projectors with a separate screen may not work with the sensor, and

must be turned on and off manually, instead.

ASIC

YSTEM

ONNECTIONS

systems that use SCART