Bose Panaray 502A 설치 매뉴얼 - 페이지 20
{카테고리_이름} Bose Panaray 502A에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Panaray 502A 32 페이지. Full-range-driver array loudspeakers
Bose Panaray 502A에 대해서도 마찬가지입니다: 기술 정보 (4 페이지), 설치 매뉴얼 (12 페이지), 매뉴얼 (4 페이지), 설치 매뉴얼 (24 페이지)
페이지 인쇄
- 1. Panaray Series IV Loudspeaker Dimensions
- 2. Series IV Loudspeaker Dimensions
- 3. Panaray 802 Series IV Loudspeaker Mounting Options
- 4. Recommended Power Amplifiers
- 5. Panaray 802 Series IV Loudspeaker Specifications
- 6. Panaray 402 Series IV Loudspeaker Specifications
- 7. Panaray 502 a Series Loudspeaker Specifications
Technical Information
®
®
Panaray
802
Series IV Loudspeaker Specifications
System Performance
(1)
Frequency Range (-10 dB)
Recommended High-Pass Protection Filter
Nominal Coverage Pattern
Loudspeaker EQ
Overload Protection
Power Handling, long-term continuous
Power Handling, peak
(4)
Sensitivity (SPL / 1 W @ 1 m)
Calculated Maximum SPL @ 1 m
Calculated Maximum SPL @ 1 m, peak
Transducers
Full-range Drivers
Nominal Impedance
Physical
Enclosure Material
Grille
Environmental
Connectors
Suspension / Mounting
Dimensions (H xW xD)
Net Weight
Shipping Weight
Product Code
Black
Notes:
1. Frequency range measured on-axis with recommended EQ in an anechoic environment.
2. Bose extended-lifecycle test: pink noise, IEC268-5 filtered, 6-dB crest factor, 100-hour duration, with recommended EQ.
3. AES component test: pink noise, IEC268-5 filtered, 6-dB crest factor, 2-hour duration, with recommended EQ.
4. Sensitivity measured in anechoic acoustic boundary conditions with recommended EQ, referenced to 1 W/m.
5. Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression.
For additional specifications and application information, please visit pro.Bose.com. Specifications subject to change without notice.
20
power limiting circuit (non-fused; automatic reset)
Bose extended-lifecycle test
Free field
(5)
8 x Bose 4.5
8 x M8 threaded inserts (2 back, 2 bottom, 4 sides)
336 mm x 523 mm x 335 mm (13.2 x 20.6 x 13.2 )
®
®
Panaray
802
Series IV
52 Hz – 15 kHz
55 Hz with minimum 12 dB / octave filter
120° H x 100° V
active EQ required for optimal performance
(2)
240 W
960 W
92 dB
116
122
(114 mm) full-range cone transducers
8 ohms
mineral-reinforced HDPE
power-coated steel grille
outdoor per IEC 529 IP55
®
2 x Neutrik
NL4 wired parallel
13.6 kg (30 lb)
17.2 kg (38 lb)
739058-0110
(3)
AES component test
300 W
1200 W
Free field
92 dB
117
123
pro.Bose.com