Bose S1 Pro 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Bose S1 Pro에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose S1 Pro 15 페이지. Multi-position pa system
Bose S1 Pro에 대해서도 마찬가지입니다: 소유자 매뉴얼 (19 페이지), 설치 지침 (2 페이지)

페이지 인쇄

System Setup

Connect Power

Make sure the power switch is in Standby ( ).

2. Plug one end of the power cord into the connector on the S1 Pro.

3. Plug the other end of the power cord into a live electrical outlet.

4. Connect sound sources before turning the system on. See "Connect Sources" below.

5. Once the sound sources are connected, turn the system on by moving the power switch to On ( ).

Note: The Quick Charge (

information, see the battery accessory owner's guide, available at www.Bose.com.

Connect Sources

Before plugging in a sound source, adjust all channel Volume controls fully counterclockwise.

Set Channel 1 & 2 Controls

Channel 1 and 2 are for use with dynamic microphones, guitars, keyboards or other instruments.

Before connecting your microphone or instrument, adjust the Volume control for the appropriate

channel fully counterclockwise.

2. Channels 1 and 2 are equipped with an integrated ToneMatch® preset to automatically optimize the

sound of your microphone or instrument. If desired, apply the ToneMatch preset by moving the

ToneMatch switch for the appropriate channel to

3. While speaking into the microphone or playing your instrument, adjust the volume to the desired level

by slowly turning the Volume control clockwise.

4. Adjust the Treble, Bass, and Reverb controls to make further refinements based on your personal

preference. While speaking into the microphone or playing your instrument, slowly adjust the control

until desired effect is achieved.

8 - Owner's Guide

) power setting is for use with the battery accessory only. For more

for microphones or

for other instruments.