Bose SoundTouch 서비스 매뉴얼 - 페이지 33

{카테고리_이름} Bose SoundTouch에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose SoundTouch 39 페이지. Wireless pedestal
Bose SoundTouch에 대해서도 마찬가지입니다: 소유자 매뉴얼 (33 페이지), 소유자 매뉴얼 (32 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (9 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (32 페이지), 빠른 시작 매뉴얼 (5 페이지), 여기에서 시작하기 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (2 페이지), 소유자 매뉴얼 (18 페이지), 빠른 시작 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

TAP Command Setup (continued)

2.2 Select setup, then serial port to set the

baud rate to 115,200 data to 8 bit, parity to

none, stop to 1 bit and flow control to none.

3. Test TAP Communication

3.1 Enter TAP command "sys ver". The

system will respond with the software ver-

sion similar to: BoseApp version:

1.0.17.11330.242810

epdbuild.rel_1.x.hepdswbld05.2013-06-

18T15:50:19.

Functional Tests

Wi-Fi Functional Test Set Up

This test uses TAP commands to connect

the product to a Wi-Fi network and stream

audio from a Bose

SoundTouch

application can be used in

place of this test. Note: Do not download the

audio file from the test URL.

WI-FI TEST PROCEDURE

URL. The Bose

Determine the security type for your router

and select the appropriate TAP command

for connecting to a Wi-Fi Router (WEP,

WPA, or no security). Refer to pages 31 -

32, TAP Command Setup.

Connect the SoundTouch wireless pedestal

to the Wave

Music system III

using the Bose link cable on the pedestal.

Connect the Wave

AC power.

1. Connecting to a Wi-Fi Router

1.1 Enter the following TAP command for

your router security type setting. Do not

enter parentheses.

1.1.1 WEP Security Type

airplay wep profile (SSID) (Password)

1.1.2 WPA Security Type

airplay wpa profile (SSID) (tkip or aes)

(Password)

1.1.3 No Security

airplay Wi-Fi profile (SSID)

1.2 Wait for the Wi-Fi indicator LED on the

back of the unit to turn white. This may

take up to a minute. While the unit is con-

necting, it will flash amber. If the indicator

does not turn white, enter the TAP

command again.

2. Testing the Wi-Fi Module.

2.1 Enter the following TAP commands.

Press the <enter> key on your keyboard

after each command. You should see an

OK response in the Tera Term dialog box.

sys configuration DemoAudioURL http://

worldwide.bose.com/downloads/assets/

audio/take5.mp3 <enter>

sys configuration DemoNetworkEnabled

true <enter>

demo enter <enter>

Music system III to