Bose Wave Multi-CD Changer 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Bose Wave Multi-CD Changer에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Wave Multi-CD Changer 48 페이지. Multi-cd changer
Bose Wave Multi-CD Changer에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (39 페이지)

페이지 인쇄

Listening to an External Audio Source

Connecting an external audio source

Playing a connected audio source

With the Multi-CD changer connected, any external audio devices you may have used with

your Wave

music system can be connected to the back of the Multi-CD changer. However,

you now need a dual RCA stereo cable.

The Wave

music system Multi-CD Changer provides two rear panel inputs (AUX 1 and AUX

2) for external audio devices such as TV, VCR, DVD player, cassette player, or MP3 player.

This gives you the advantage of hearing Wave

To connect a device, connect one end of the cable to the audio output jacks of the source

and the other end to one of the AUX inputs on the changer. Be sure to match the red and

white plugs on the cable to the red (R) and white (L) AUX jacks on the changer.

Connection example:

a TV connected to the Multi-CD Changer

Red

Use only a stereo connection. You will not hear the connected

device if just the left (L) or right (R) channel is connected.

To listen to a connected source:

1. Turn on the external device.

2. Press AUX on the Wave

between the AUX 1 and AUX 2 inputs. AUX 1 or AUX 2 appears on the display to confirm

your selection.

3. Adjust the volume using the Wave

Note: The Wave

music system remote control cannot turn a connected AUX device on or off, or

change its settings or selections.

Note: Neither AUX 1 or AUX 2 can be selected as an alarm source.

music system sound from a range of sources.

music system remote control. Press AUX again to switch

music system remote control.

Red