Beckett CB221UL 소유자 매뉴얼
{카테고리_이름} Beckett CB221UL에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Beckett CB221UL 6 페이지. Automatic condensate unit
Beckett CB221UL에 대해서도 마찬가지입니다: 소유자 매뉴얼 (6 페이지)
페이지 인쇄
AUTOMATIC CONDENSATE UNIT
RULES FOR SAFE OPERATION
1.
Carefully read the Owners Manual and rules for safe operation.
2.
All wiring must conform to local codes. Use the National Electric Code if local code is nonexistent.
3.
CAUTION! To reduce risk of electric shock disconnect form power supply before servicing, pull the plug on models which have
plug-in connections.
4.
Do not handle the pump with wet hands or when standing in water as fatal shock could occur. Disconnect main power before
handling unit for ANY REASON!
5.
Protect the power cable from coming in contact with sharp objects.
6.
Do not kink power cable and never allow the cable to come in contact with oil, grease, hot surfaces or chemicals.
7.
Make certain that line voltage conforms to the voltage specified on motor and nameplate.
8.
WARNING! To reduce risk of electrical shock, connect only to a properly grounded grounding type receptacle.
Select a location for the pump. It should be as
near as possible to the air conditioning coil.
The pump must be level. The inlet hole must
be below the coil drain.
Carefully unpack the pump. Remove the
switch/motor cover. Check each float arm for
"free" action.
Owners Manual
Keep For Future Reference
INSTALLATION OPERATION
&$87,21 Read rules for Safe Operation and Installation.
&$87,21
&$87,21
&$87,21
Model: CB22
20' LIFT
Models:
CB221UL - 115V
CB222UL - 230V
INTRODUCTION
INSTALLATION
BECKETT CORPORATION
Irving, Texas
www. beckettpumps.com
Phone: 972-871-8000
Toll Free: 1-888-BECKETT
Fax: 972-871-8888
© 2010 BECKETT CORPORATION All Rights Reserved
FAN
OUTLET
INLET
STAND
MOTOR
SAFETY SWITCH
PRIMARY
SWITCH
PRIMARY
FLOAT
SAFETY
FLOAT
Y8627 Rev. B