Bose FreeSpace IZA 2120-HZ 설치 및 운영 매뉴얼 - 페이지 27
{카테고리_이름} Bose FreeSpace IZA 2120-HZ에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose FreeSpace IZA 2120-HZ 48 페이지. Integrated / zone amplifiers
Bose FreeSpace IZA 2120-HZ에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (48 페이지)
페이지 인쇄
- 1. Table of Contents
- 2. Freespace® Iza 2120-Lz / Iza 2120-Hz Integrated Zone Amplifier
- 3. Iza 2120-Lz Rear Panel
- 4. Za 2120-Lza/Hza Rear Panel
- 5. Remote Volume Control
- 6. Connecting the CC-1 to a Freespace® Amplifier
- 7. Connecting an Iza 2120-Lz/Hz Amplifier to a Za 2120-Lza/Hza Amplifier
- 8. Troubleshooting
pro.Bose.com
Configuration example #2:
REMOTE 1 and REMOTE 2 can be a Bose volume control with A/B switch user interface (PC 041967)
accessory. REMOTE 1 will control the level and source selection of output one and REMOTE 2 will control
the level and source selection of output two. This configuration requires setting the REMOTE 1 CONTROL
DIP switch to ZONE 1 and the A/B SELECT DIP switch to REMOTE.
Bose
1
PWR
volume
control
2
VOL
with
3
COM
A/B
switch
4
A/B
Configuration example #3
REMOTE 1 can be a Bose volume control with A/B switch user interface accessory (PC 041967) and
REMOTE 2 can be a volume control user interface accessory (PC 041966). In this configuration, REMOTE 1
controls the level of output one and the source selection for both outputs. REMOTE 2 controls the level
for output two. The A/B pin from REMOTE 1 needs to be jumpered with wire to the A/B pin on REMOTE 2.
This configuration requires setting the REMOTE 1 CONTROL DIP switch to ZONE 1 and the A/B SELECT
DIP switch to REMOTE. If the A/B jumper wire is not connected, output two will default to amplifying
input B constantly. If output two is to amplify input A constantly, the A/B pin of REMOTE 2 needs to be
jumpered to the COM pin. This configuration also works with the remote types reversed with a volume
control user interface accessory (PC 041966) on REMOTE 1 and a volume control with A/B switch user
interface accessory (PC 041967) on REMOTE 2.
Bose volume
1
PWR
control with
A/B switch
2
VOL
3
COM
4
A/B
Bose volume
1
PWR
control
2
VOL
IZA 2120-HZ
REMOTE 1
IZA 2120-HZ
REMOTE 1
Jumper
wire
REMOTE 2
Bose
1
PWR
volume
control
2
VOL
with
3
COM
A/B
switch
4
A/B
DIP switch settings
DIP switch settings
Installation
IZA 2120-HZ
REMOTE 2
Installation Guide - 27