Beckett 7505P 1530 매뉴얼 - 페이지 7
{카테고리_이름} Beckett 7505P 1530에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Beckett 7505P 1530 13 페이지. Advanced burner control
Beckett 7505P 1530에 대해서도 마찬가지입니다: 설명 / 애플리케이션 (13 페이지)
페이지 인쇄
Typical Furnace Wiring:
Figure 6 – 7505A
Intermittent ignition, no valve-on or
►
motor-off delays
L1
L2
SAFETY AND
OPERATING
LIMITS
IGNITER
MOTOR
CAD CELL
Figure 7 – 7505A
Interrupted ignition, no valve-on or
►
motor-off delay
L1
L2
SAFETY AND
OPERATING
LIMITS
IGNITER
MOTOR
CAD CELL
120v GeniSys Control Installation and Operation Manual
(for replacement of R8184G)
W
R
THERMOSTAT
IGNITER
L2 (IGN)
MOTOR
L2 (MTR)
LIMIT
L1
LIMIT
TR-TW
JUMPER
L2
TR
VALVE
L2 (VLV)
TW
TR-TW Terminals
Located on
CAD
TR-TW TERMINALS
opposite side of
LOCATED ON OPPOSITE
CELL
Control
SIDE OF CONTROL
(If applicable)
(for replacement of R7184A)
W
R
THERMOSTAT
IGNITER
L2 (IGN)
MOTOR
L2 (MTR)
LIMIT
L1
LIMIT
TR-TW
JUMPER
L2
TR
VALVE
L2 (VLV)
TW
TR-TW Terminals
Located on
CAD
TR-TW TERMINALS
opposite side of
LOCATED ON OPPOSITE
CELL
Control
SIDE OF CONTROL
(If applicable)
Figure 8 – 7505B
Interrupted ignition, valve-on delay only
►
(no motor-off delay)
L1
L2
SAFETY AND
OPERATING
LIMITS
IGNITER
MOTOR
OIL VALVE
CAD CELL
Figure 9 – 7505P
Interrupted ignition, valve-on and motor-
►
off delays
L1
L2
SAFETY AND
OPERATING
LIMITS
IGNITER
MOTOR
OIL VALVE
CAD CELL
NOTE: Motor-off delay on a 7505P will be disabled if the
safety and operating limits as shown in Figures 5 and 9
interrupt power to the control terminal L1.
Connect thermostat leads (if applicable) to the TR and
TW terminals on the control or jumper the TR and TW
terminals on the control as directed by the appliance
wiring diagram.
NOTE: If the thermostat short cycles or operates improp-
erly, it may require an isolation relay for proper operation.
The Beckett A/C Ready Kit (part no. 51950U) provides
this function. Wiring instructions are included with the
A/C Ready Kit.
(for replacement of R7184B)
W
R
THERMOSTAT
IGNITER
L2 (IGN)
MOTOR
L2 (MTR)
LIMIT
L1
LIMIT
TR-TW
JUMPER
L2
TR
VALVE
L2 (VLV)
TW
TR-TW Terminals
CAD
TR-TW TERMINALS
Located on
LOCATED ON OPPOSITE
opposite side of
CELL
Control
SIDE OF CONTROL
(If applicable)
(for replacement of R7184P)
W
R
THERMOSTAT
IGNITER
L2 (IGN)
MOTOR
L2 (MTR)
L1
LIMIT
TR-TW
JUMPER
L2
TR
VALVE
L2 (VLV)
TW
TR-TW Terminals
Located on
CAD
TR-TW TERMINALS
opposite side of
LOCATED ON OPPOSITE
CELL
Control
SIDE OF CONTROL
(If applicable)
7