Bose PM8500 기술 데이터 시트

{카테고리_이름} Bose PM8500에 대한 기술 데이터 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose PM8500 6 페이지. Configurable professional power amplifier
Bose PM8500에 대해서도 마찬가지입니다: 설치 및 안전 매뉴얼 (21 페이지), 사용자 설명서 (44 페이지)

페이지 인쇄

PowerMatch

configurable power amplifier

Product Overview

The Bose® PowerMatch PM8500 configurable professional

power amplifier provides concert-quality sound with a high

level of scalability and configurability. The PM8500 offers

multiple channel and power options, an integrated audio

DSP, front panel interface and USB connection. Ethernet-

equipped versions enable network configuration, control and

monitoring. An expansion slot supports inputs from optional

digital accessory cards. PowerMatch amplifiers utilize

numerous Bose technologies to deliver an unprecedented

combination of performance, efficiency, and ease of

installation—all in a reliable, proprietary design. Available

in two versions, the PM8500 provides USB connection for

single-unit setup and control using Bose ControlSpace®

V3.0 or higher software. The PM8500N adds Ethernet

connectivity for network control and monitoring of multiple

"N" version amplifiers.

Applications

Designed for a wide range of applications, including:

• Auditoriums

• Performing arts venues

• Theaters

• Houses of worship

• Arenas

• Hospitality venues

Bose Professional Systems Division

PM8500 / PM8500N

Key Features

• QuadBridge™ Technology – Allows each 4-channel

loudspeaker block to be configured as Mono, V-Bridge, I-

Share or Quad modes, allowing the total available power

of the amplifier block to be allocated to one or more output

channels. V-Bridge and Quad modes can drive either low

impedance or 70/100V loads.

• Bose® ControlSpace® Designer™ software – PowerMatch

amplifiers can be fully configured using ControlSpace

Designer software via the onboard front panel USB

connection, or the rear panel Ethernet connection (network

models only). Using ControlSpace Designer software you

can access additional features including: Parametric EQ

stages, load sweep of each output channel and auto standby.

ControlSpace Designer software is also used to integrate

network model PowerMatch amplifiers into larger control and

monitoring systems comprised of Bose ESP processors and

CC control centers.

• Auto-Standby/Auto-Wake function – When enabled, this

function automatically enters/exits Standby Mode, allowing the

system to consume less power.

• Dual voltage and current feedback loop – Proprietary

design combines Class-D efficiency with a unique current

and voltage feedback loop circuit that continuously monitors

and controls both the current and voltage delivered to the

loudspeaker load. Independent of power level and load

impedance, the amplifier consistently delivers the widest

possible dynamic range, frequency response and lowest

possible distortion.

• PeakBank™ power supply – Regenerative 4-quadrant power

supply enables higher power density while allowing the re-

use of energy from reactive loads that is normally wasted in

conventional Class-D designs. This highly efficient amplifier

design delivers sustainable and repeatable low frequency

response.

• Fast-tracking power factor correction (PFC) – Efficiently

manages the current drawn from the AC mains, allowing the

amplifier to drive loudspeakers to maximum output longer

without power fluctuation. PFC provides superior transient

response and functions at peak burst power much longer

than conventional Class-D amplifier designs to satisfy the

requirements of even the most demanding program material.

OF 6

p r o . B o s e . c o m