Bose PowerMatch PM8500N 사용자 설명서 - 페이지 12

{카테고리_이름} Bose PowerMatch PM8500N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose PowerMatch PM8500N 44 페이지. Configurable professional power amplifier

User guide

introduction

Thank you for choosing the bose

The PowerMatch PM8500 Configurable Professional Amplifier delivers concert sound quality for fixed-installation sound reinforcement

systems. Building on the ruggedness proven by 20 years of experience building Class-D amplifiers for the automotive market, the

PowerMatch PM8500 amplifier adds numerous new Bose proprietary technologies to simultaneously provide class-leading power,

efficiency, sound quality, and reliability.

This document delivers detailed installation and stand-alone configuration information. The information furnished in this guide is

intended to help you install and set up the product, but does not include all details of design, production, or variations of the equipment.

Nor does it cover every possible situation that may arise during installation, operation, or maintenance. If you need assistance beyond

the scope of this guide, please contact your local Bose Representative or Technical Support specialist.

Throughout this document, the naming convention "PM8500" refers to both the PM8500 and PM8500N versions, unless stated

otherwise.

The following additional documents can help guide you through the setup and use of this product:

• PowerMatch PM8500 Configurable Professional Amplifier Installation and Safety Guidelines

This document outlines safety warnings, precautions, basic setup, and configuration. A printed version of this guide is supplied with

the amplifier.

• ControlSpace Designer™ Software User Guide (PDF)

This document provides detailed instructions on how to use ControlSpace Designer PC software to fully configure, update, network

control, and monitor the PowerMatch amplifier. This document and the free ControlSpace Designer software can be downloaded from

pro.bose.com.

• PowerMatch Class-D Amplifier

New, proprietary design combines Class-D efficiency with a dual feedback circuit that continuously monitors and controls both the

current and voltage of the output devices. This combination provides the PowerMatch amplifier with the highest-quality output power,

audio performance, reliability, and efficiency.

• QuadBridge™ Output Mode

Outputs can be configured as single, dual, or quad channel modes, which allows 4 kW of power to be allocated between 2 to 8

channels. These software-selectable configurations range from 8 channels at 500 watts, 4 channels at 1000 watts, 2 channels at 2000

watts, or mixed combinations. Dual or quad modes can drive either low-impedance or 70 V or 100 V loads.

• PeakBank™ Power Supply

Regenerative 4-quadrant power supply with fast-tracking Power Factor Correction (PFC) supports high efficiency, while improving the

peak burst power for superior transient response and current reserve for bass impact.

• 8 x 500 W from Single AC Mains Outlet

The PM8500 delivers 4 kW rated power from a single AC mains outlet, with greater than 75% conversion efficiency.

• Optimized Loudspeaker Processing

Integrated audio DSP for loudspeaker EQ, crossover, delay, and limiting. When used with RoomMatch™ and other Bose

loudspeakers, the presets provide all required signal processing with optimized protection limiting of self-powered loudspeakers.

• Software Setup and Network Monitoring

All models have USB for Bose ControlSpace Designer software programming, with PM8500N adding Ethernet network control and

monitoring.

Page 12 User Guide

PowerMatch™ PM8500 configurable professional power amplifier!

pro.bose.com

English