Bose SoundTouch SA-4 매뉴얼 - 페이지 17
{카테고리_이름} Bose SoundTouch SA-4에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose SoundTouch SA-4 34 페이지. Amplifier
Bose SoundTouch SA-4에 대해서도 마찬가지입니다: 소유자 매뉴얼 (42 페이지), 소유자 매뉴얼 (36 페이지)
페이지 인쇄
- 1. About Your Soundtouch™ Sa-4 Amplifier
- 2. Adding the System to Your Wi-Fi
- 3. Installing the Soundtouch™ Sa-4 Amplifier
- 4. Installing the Soundtouch™ Wireless Adapter
- 5. Connecting Speakers to the Sa-4 Amplifier
- 6. Alternate Setup Method
- 7. Troubleshooting
- 8. Appendix A: Sa-4 Amplifier Connector Panel
Playing music with the SoundTouch™ controller
During the app set up process, the SoundTouch
wireless connection was established. You can use the SoundTouch
play and manage your presets.
Note: The SoundTouch
SoundTouch
In concrete, stucco or brick homes, the range will likely be less and
may vary. The number of other active wireless devices in the home
may affect range. Ideally, there should be no more than one wall or
ceiling between the controller and the wireless adapter.
SoundTouch
Skip backward
Using the SoundTouch™ controller
• Press a preset to play it. Press and hold a preset to personalize it.
• Move your finger around the Presets ring to view presets.
• Turn the Volume ring to adjust the volume.
• Touch
or
• Press and hold the screen to turn the SoundTouch
• Press the screen to play or pause music.
• Touch and hold the SoundTouch
system. To connect to another system, refer to the help system in the app.
Note: If the controller is in power saving mode, wave your hand
within 6 in. (15 cm) above the screen to turn it on.
controller must be within 70 feet (21 m) of the
™
wireless adapter in wood-construction homes.
™
icon
™
Screen
to skip through content.
controller was activated and a
™
icon to disconnect the controller from a
™
Using the System
controller to
™
Presets ring
Skip forward
Volume ring
system on and off.
™
English - 17