Bose SoundTouch SA-4 소유자 매뉴얼 - 페이지 29
{카테고리_이름} Bose SoundTouch SA-4에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose SoundTouch SA-4 36 페이지. Amplifier
Bose SoundTouch SA-4에 대해서도 마찬가지입니다: 매뉴얼 (34 페이지), 소유자 매뉴얼 (42 페이지)
페이지 인쇄
Appendix A: SA-4 amplifier connector panel
AC
POWER
Connector Description
AC
AC power cord connector. Power is applied when the power cord is
POWER
inserted and plugged into an AC (mains) outlet. There is no on/off switch
on the SoundTouch
VCA
Local volume control connector. Allows you to control the volume using
a wall-mounted control. Contact your Bose dealer or call Bose customer
service for information on installing this feature. See the contact list
enclosed in the carton.
SPEAKER
Left and right speaker outputs. Connect only unpowered speakers. A
OUTPUTS
6-ohm minimum load is required. To determine the correct speaker wire
size, see "Speaker cable recommendations" on page 27.
ROOM
Only switch A is used for SoundTouch
CODE
The output of the SoundTouch
switches
be set to stereo (Switch A up) or mono (Switch A
down). The mono output mode feeds left and right
channel audio to both the left and right outputs. This
is useful in situations where a stereo output isn't
feasible such as when outdoor speakers are used in
a large area.
The remaining six switches should remain in the
default configuration:
Indicator
The green indicator shows the operational state of the SA-4 amplifier.
See "SoundTouch
BoseLink
Used for connecting the SoundTouch
INPUT
SA-4 amplifier.
BoseLink
Not used.
OUTPUT
VCA
ROOM CODE switches
SPEAKER
OUTPUTS
SA-4 amplifier.
™
SA-4 amplifier indicator" on page 19.
™
Indicator
systems.
™
SA-4 amplifier can
™
wireless adapter to the
™
Appendices
BoseLink
OUTPUT
connector
BoseLink
INPUT
connector
Switch B
Down
Switch C
Down
Switch 6
Down
Switch 7
Down
Switch 8
Down
Switch 9
Up
English - 29