Bose A20 Aviation 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Bose A20 Aviation에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose A20 Aviation 43 페이지. Aviation headset
Bose A20 Aviation에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 소유자 매뉴얼 (44 페이지), 소유자 매뉴얼 (40 페이지), 소유자 매뉴얼 (44 페이지), 소유자 매뉴얼 (44 페이지), 빠른 참조 매뉴얼 (2 페이지)

00_Cavu.book Page 8 Thursday, October 28, 2010 12:03 PM

Tab 8, 16

Tab 7, 15

REPARING THE

Your headset may be shipped with the microphone assembly (boom microphone

and cable) attached to the left earcup. If your headset is shipped with the

microphone assembly packed separately, you can attach it to either earcup.

Choose the earcup (L or R) to receive the microphone assembly. Also, make

sure that the earcup connector pins are clean and free of debris.

1. Use a Phillips screwdriver to loosen the two screws on the access cover

near the bottom of the earcup where you want to attach the

microphone assembly.

2. Remove the access cover to reveal the connector pins on the earcup.

3. Carefully line up the microphone assembly to the small connector socket

on the earcup.

4. Slide the connector into the socket until it reaches the stop.

Connector

Access

pins

cover

Microphone assembly

CAUTION: Do not force the connector into the socket, or earcup damage may

occur.

5. Tighten the screws to secure the assembly.

6. Attach the access cover to the earcup that does not have the microphone

assembly attached. Insert the screws, then align and tighten them.

Note: The headset will not work without the access cover installed.

CAUTION: Be sure to try the headset and fully test its operation before flight.

Tab 6, 14

Tab 5, 13

Tab 4, 12

EADSET FOR

Connector pins

Tab 3, 11

Tab2, 10

L for left

English