Bose A20 Aviation 소유자 매뉴얼 - 페이지 20

{카테고리_이름} Bose A20 Aviation에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose A20 Aviation 44 페이지. Aviation headset
Bose A20 Aviation에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 소유자 매뉴얼 (44 페이지), 소유자 매뉴얼 (43 페이지), 소유자 매뉴얼 (40 페이지), 소유자 매뉴얼 (44 페이지), 빠른 참조 매뉴얼 (2 페이지)

Using the Headset

Using the headset with a Bluetooth

Press

to turn on the headset.

Make sure the Secondary Audio Mode selector is in the MUTE or MIX position

(not OFF).

MUTE

The power indicator glows green or yellow, depending on the charge level of

the battery. (If the light is red, the battery is low and needs replacing.)

The Bluetooth indicator flashes purple to indicate that the headset is in pairing

mode.

Note: The first time you turn on the headset, it will automatically go into

pairing mode and the Bluetooth indicator will flash purple. This will only

happen the first time you turn on the headset.

Locate the Bluetooth menu on your device and make sure the Bluetooth

feature is ON.

Select Bose A20 from the Bluetooth device list.

Bose A20

The Bluetooth indicator flashes blue while the devices are pairing, and a tone

indicates successful connection.

Note: After five minutes of inactivity, the headset will automatically exit pairing

mode and the Bluetooth indicator will turn off. To turn the Bluetooth

feature back on, press

Note: Each time you turn on the Bluetooth feature, the headset will attempt

to reconnect with the two most recently connected Bluetooth devices.

If the device(s) are turned off, or out of range, the headset will return to

pairing mode after five minutes. See "Reconnecting to a previously con-

nected device" on page 23.

20 - English

MIX

device