Bose Lifestyle 35 Series II 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Bose Lifestyle 35 Series II에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Lifestyle 35 Series II 25 페이지. Noise cancelling
Bose Lifestyle 35 Series II에 대해서도 마찬가지입니다: 설치 매뉴얼 (42 페이지), 설치 매뉴얼 (36 페이지), 소유자 매뉴얼 (24 페이지), 소유자 매뉴얼 (13 페이지), 빠른 설정 매뉴얼 (3 페이지), 운영 매뉴얼 (46 페이지), 소유자 매뉴얼 (36 페이지), 소유자 매뉴얼 (32 페이지), 빠른 시작 매뉴얼 (2 페이지), 공장 초기화 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 소유자 매뉴얼 (38 페이지)

English

Español

Figure 2

Connection panels on the

two units

Français

What distinguishes the two units

The connection panel on each unit identifies it by name: TRANSMITTER or RECEIVER. Two

Bose

link jacks and a Channel button further distinguish the transmitter.

For compatibility, the two units have a matching Setup Code, set at the factory with both

switches in the "up" position (Figure 2). A Status LED lights when each unit is plugged in and

the two units are communicating.

Transmitter

Bose

link jacks

Note: For information on the meaning of the different Status LED lights, refer to

"Check the indicators and settings" on page 8.

Place the transmitter in the same room with the LIFESTYLE

receiver in the same room with your Bose link expansion product.

Note: Use of the audio link with products that are not Bose link compatible requires an adapter

cable. For further information, refer to "Instructions for non-Bose or older Bose products" on

page 7.

Considerations for positioning:

• Place each unit upright with all feet flat on a level surface, such as a floor, table, or shelf.

• Do not tip either unit on its side.

• Place each unit within 7 feet (2 meters) of the product to which it is connected (using the

supplied Bose link A cable).

• Keep the two units within 80 feet (24 meters) of each other.

• Be aware that the strongest signal direction is above and around, not below,

the transmitter.

Channel switch

Bose link jack

Status LED

NTRODUCTION

Receiver

system media center. Place the