Drolet The Hunter 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Drolet The Hunter에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drolet The Hunter 9 페이지. Wood heater and cook stove
Drolet The Hunter에 대해서도 마찬가지입니다: 소유자 매뉴얼 (11 페이지)

페이지 인쇄
Drolet The Hunter 소유자 매뉴얼

Assembling your HUNTER :

Fig. 1

Floor Protection:

Your wood stove has to be placed on a non-combustible surface. The following minimum
specifications must be respected :
NON-COMBUSTIBLE FLOOR PROTECTION
Thickness
1/4" (6 mm)
Clearances from combustible material :
Clearances from combustible material as described below must be scrupulously respected
upon installation.
CLEARANCES FROM COMBUSTIBLE MATERIAL
Back wall
48" (1220 mm)
* Height, from stove surface to ceiling.
1. Turn the stove upside down;
2. Screw the four (4) legs into place (see
3. Slide the heat shield between the four
4. Slide the heat baffle into place (inside
NOTE : You must slightly bend the sheet
metal in order to get the heat shield into
place.
facing upward.
Front
protrusion
18" (460 mm)
Side wall
48" (1220 mm)
Page 3 of 8
LEGS, HEAT SHIELD and FIRE
BAFFLE
fig. 1);
(4) legs and the bottom of your stove.
the firebox), just below the flue outlet.
Make sure that that the bumps on the
baffle are facing upward.
The heat shield's cross must be
Side
protrusions
8" (200 mm)
Corners
48" (1220 mm)
Rear
protrusion
8" (200 mm)
Height *
60" (1524 mm)