Drolet ALASKA 2000 설치 및 운영 매뉴얼 - 페이지 7

{카테고리_이름} Drolet ALASKA 2000에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drolet ALASKA 2000 16 페이지. Oil burning stove

• Make sure that the tank outlet is 12" higher than the inlet of the carburetor. (Gravity fed)

• Use only caper piping to connect tank to stove.

• Make sure that there is a small slope on the connection from the tank toward the stove.

• A 3" down slope is needed on the tank itself, from the outlet towards the other end of the tank.

• When the tank is installed outdoors, it is preferable to use oil #1, to avoid viscosity problems.

NOTE :

THE BAROMETRIC TANK SHALL BE LOCATED SO THAT THE TANK WILL NOT BE

EXPOSED TO THE DIRECT RAYS OF THE SUN OR BE ADJACENT TO ANY SOURCE

OF INTENSE HEAT.

Figure 11 :

STOVE AND OIL TANK CONNECTION

CONNECTING STOVE TO OIL TANK

Page 6 of 15